HPE Integrity NonStop NS2100, Руководство по планированию

Страница: 16 / 128

NOTE: For details about how to connect to the embedded or optional expanded Ethernet
ports on the VIO enclosure, ask your Hewlett Packard Enterprise service provider to refer
to the
Versatile I/O Manual .
•
Two fans to provide the cooling for components inside a VIO enclosure.
•
Two power supplies with universal AC input to provide power to the components in a VIO
enclosure.
CLuster I/O Modules (CLIMs)
CLIMs are rack-mounted servers that can function a ServerNet Ethernet or I/O adapters.
The CLIM complies with Internet Protocol version 6 (IPv6), an Internet Layer protocol for
packet-switched networks, and has passed official certification of IPv6 readiness.
NOTE: All CLIMs use the Cluster I/O Protocols (CIP) subsystem. For more information about
the CIP subsystem, see the Cluster I/O Protocols (CIP) Configuration and Management Manual .
Two models of base servers are used for CLIMs. You can determine a CLIM's model by looking
at the label on the back of the unit (behind the cable arm). This label refers to the number as a
“PID,” but it is not the PID of the CLIM. It is the “Number on Label” in
Table 1 (page 16) below.
The same number is listed as the part number in OSM. Below is the mapping for CLIM models
and earliest supported RVUs:
Table 1 CLIM Models and RVU Requirements
Earliest Supported RVU Base Server Number on Label Model
J06.14 and later RVUs DL380 494329-B21 G6
J06.14 and later RVUs DL380p 692764-001 Gen8
These are the front views of each CLIM model. For an illustration of the back views, refer to each
supported CLIM configuration.
16 NS2100 System Overview