HPE FlexNetwork 5510 HI Series, Руководство по настройке Mpls

Страница: 431 / 505

422
Step Command Remarks
7. Allow the local AS number
to appear in the AS_PATH
attribute of routes received
from the peer, and set the
maximum number of
repetitions.
peer { group-name | ip-address
[ mask-length ] } allow-as-loop
[ number ]
By default, BGP discards
incoming route updates that
contain the local AS number.
8. Redistribute remote site
routes advertised by the PE
into BGP.
import-route protocol [ { process-id |
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
By default, no routes are
redistributed into BGP.
9. (Optional.) Configure
filtering of advertised
routes.
filter-policy { acl-number | prefix-list
prefix-list-name } export [ protocol
process-id ]
By default, BGP does not filter
advertised routes.
10. (Optional.) Configure
filtering of received routes.
filter-policy
{ acl-number |
prefix-list
prefix-list-name } import
By default, BGP does not filter
received routes.
2. Configure a VPN site:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Configure the MCE as an
EBGP peer.
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
N/A
4. Enter BGP-VPN IPv4 unicast
address family view.
address-family ipv4 [ unicast ] N/A
5. Enable BGP to exchange
IPv4 unicast routes with the
peer.
peer { group-name | ip-address
[ mask-length ] } enable
By default, BGP does not
exchange IPv4 unicast routes with
any peer.
6. Redistribute the IGP routes
of the VPN into BGP.
import-route
protocol
[ { process-id | all-processes }
[
allow-direct
|
med med-value
|
route-policy route-policy-name ]
* ]
By default, no routes are
redistributed into BGP.
A VPN site must advertise the
VPN network addresses it can
reach to the connected MCE.
Configuring IBGP between MCE and VPN site
To run IBGP between an MCE and a VPN site, you must configure a BGP peer for each VPN
instance on the MCE, and redistribute the IGP routes of each VPN instance on the VPN site.
1. Configure the MCE:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter BGP-VPN instance
view.
ip vpn-instance
vpn-instance-name
N/A
4. Configure an IBGP peer.
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
N/A
5. Enter BGP-VPN IPv4 unicast
address-family ipv4
[
unicast
] N/A