HPE FlexNetwork 5510 HI Series, Руководство по настройке Mpls

Страница: 149 / 505

140
Step Command Remarks
number of consecutive lost
or erroneous hellos. is 4.
4. Configure the interval for
sending hello requests.
hello interval interval
By default, hello requests are sent
every 5 seconds.
5. Return to system view.
quit
N/A
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Enable RSVP hello
extension.
rsvp hello enable
By default, RSVP hello extension
is disabled.
Configuring RSVP authentication
RSVP adopts hop-by-hop authentication to prevent fake resource reservation requests from
occupying network resources. The interfaces at the two ends of a link must use the same
authentication key.
RSVP authentication can be configured in the following views:
•
RSVP view —Configuration applies to all RSVP security associations.
•
RSVP neighbor view —Configuration applies only to RSVP security associations with the
specified RSVP neighbor.
•
Interface view —Configuration applies only to RSVP security associations established on the
current interface.
Configurations in RSVP neighbor view, interface view, and RSVP view are in descending order of
priority.
To configure RSVP authentication in RSVP neighbor view:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter RSVP view.
rsvp
N/A
3. Create an RSVP
authentication neighbor and
enter RSVP neighbor view.
peer ip-address
By default, the device does not
have any RSVP authentication
neighbors.
4. Enable RSVP authentication
for the RSVP neighbor and
specify the authentication
key.
authentication key { cipher |
plain
} auth-key
By default, RSVP authentication
is disabled.
5. Enable challenge-response
handshake for the RSVP
neighbor.
authentication challenge
By default, the
challenge-response handshake
function is disabled.
6. Configure the idle timeout for
the RSVP security
associations with the RSVP
neighbor.
authentication lifetime life-time
By default, the idle timeout is 1800
seconds (30 minutes).
7. Specify the maximum
number of out-of-sequence
RSVP authentication
messages that can be
received from the RSVP
neighbor.
authentication window-size
number
By default, only one RSVP
authenticated message can be
received out of sequence.