HPE FlexNetwork 5510 HI Series, Руководство по настройке Mpls

Страница: 278 / 505

269
Step Command Remarks
2. Configure an IPv6 static
route for a
VPN
instance.
ipv6 route-static vpn-instance
s-vpn-instance-name ipv6-address
prefix-length { interface-type interface-number
[ next-hop-address
] | nexthop-address
[ public ] | vpn-instance d-vpn-instance-name
nexthop-address } [ permanent ] [ preference
preference-value ] [ tag tag-value ]
[ description description-text ]
By default, no IPv6 static
route is configured for a
VPN instance.
Perform this
configuration on the PE.
On the CE, configure a
common IPv6 static
route.
For more information
about IPv6 static routing,
see
Layer 3—IP Routing
Configuration Guide .
Configuring RIPng between a PE and a CE
A RIPng process belongs to the public network or a single VPN instance. If you create a RIPng
process without binding it to a VPN instance, the process belongs to the public network.
For more information about RIPng, see Layer 3—IP Routing Configuration Guide .
To configure RIPng between a PE and a CE:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a RIPng process for a
VPN instance and enter
RIPng view.
ripng
[ process-id ]
vpn-instance
vpn-instance-name
Perform this configuration on the
PE. On the CE, create a common
RIPng process.
3. Return to system view.
quit N/A
4. Enter interface view.
interface interface-type
interface-number
N/A
5. Enable RIPng on the
interface.
ripng process-id enable
By default, RIPng is disabled on
an interface.
Configuring OSPFv3 between a PE and a CE
An OSPFv3 process belongs to the public network or a single VPN instance. If you create an OSPF
process without binding it to a VPN instance, the process belongs to the public network.
For more information about OSPFv3, see Layer 3—IP Routing Configuration Guide .
To configure OSPFv3 between a PE and a CE:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an OSPFv3 process
for a VPN instance and enter
OSPFv3 view.
ospfv3 [ process-id ]
vpn-instance vpn-instance-name
Perform this configuration on the
PE. On the CE, create a common
OSPF process.
Deleting a VPN instance also
deletes all related OSPFv3
processes.
3. Set the router ID.
router-id router-id N/A
4. (Optional.) Configure an
OSPFv3 domain ID.
domain-id { domain-id
[ secondary ] | null }
The default domain ID is 0.
Perform this configuration on the