The fields of Network IP Settings page are explained
LQWKHIROORZLQJVHFWLRQ
.
Enable LAN:
To enable or disable the LAN Settings.
LAN Interface:
Lists the LAN interfaces.
MAC Address:
This field displays the MAC Address of the device. This is a read only field.
Enable IPv4:
This option is to enable/disable the IPv4 settings in the device.
Enable IPv4 DHCP:
This option is to enable IPv4 DHCP support for the selected interface.
IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway:
These fields are for specifying the static IPv4
address, Subnet Mask and Default Gateway to be configured to the device.
,3$GGUHVVPDGHRIQXPEHUVVHSDUDWHGE\GRWVDVLQ³[[[[[[[[[[[[´
(DFK1XPEHUUDQJHVIURPWR
)LUVW1XPEHUPXVWQRWEH
Enable IPv6:
To Enable/Disable the IPv6 configuration settings.
Enable IPv6 DHCP:
To Enable/Disable the IPv6 settings in the device. It dynamically configures IPv6 address
using DHCP (Dynamic Host Configuration Protocol).
IPv6 Index:
To specify a static IPv6 Index to be configured to the device.
)RUH[DPSOH
0
IPv6 Address:
To specify a static IPv6 address to be configured to the device.
)RUH[DPSOH
2004::2010
Subnet Prefix length:
To specify the subnet prefix length for the IPv6 settings.
9DOXHUDQJHVIURPWR
Enable VLAN:
To enable/disable the VLAN support for selected interface.
VLAN ID:
The Identification for VLAN configuration.
9DOXHUDQJHVIURPWR
VLAN Priority:
The priority for VLAN configuration.
9DOXHUDQJHVIURPWR
LVWKHKLJKHVWSULRULW\IRU9/$1
Save:
To save the entries.
Procedure
1. Check
Enable LAN
to enable LAN support for the selected interface..
2. Select the
LAN Interface
to be configured.
3. Check Enable IPv4 to enable IPv4 support for the selected interface.
4. Check
Enable IPv4 DHCP
to dynamically configure IPv4 address using DHCP.
5. If the field is disabled, enter the
IPv4 Address, IPv4 Subnet Mask
and
IPv4 Default Gateway
in the
respective fields.
4
1
