HPE Apollo 4530, Руководство по техническому обслуживанию и ремонту

Страница: 39 / 82

CAUTION:
To avoid damage to the device, do not use the removal handle to carry it.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server or the enclosure
unless all drive and device bays are populated with either a component or a blank.
WARNING:
To reduce the risk of injury from electric shock, do not install more than one drive carrier at a
time.
6. Prepare the low-profile LFF hot-plug drive for installation.
7. Install the low profile LFF hot-plug drive in the chassis.
8. Determine the status of the drives using the drive LEDs located on the storage display LEDs .
Removing and replacing the drive backplane
Procedure
1. Power down the server associated with the drive backplane to be replaced.
IMPORTANT:
Label the drives before removing them. The drives must be returned to their original locations.
2. Remove all drives in that segment .
Removing and replacing the drive backplane 39