manualshive.com logo in svg

HPE Apollo 4530, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HPE Apollo 4530 Скачать руководство пользователя страница 27

Install the access panel

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.

CAUTION:

To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause ESD.

CAUTION:

Do not operate the chassis with the access panel open or removed. Operating the chassis in this
manner results in improper airflow and improper cooling that can lead to thermal damage.

Procedure

1.

Place the access panel on top of the chassis.

2.

Slide the access panel toward the front of the chassis. The access panel locks into position.

Open the cable management arm

Procedure

1.

To open the cable management arm, lift it up as you swing it open.

Install the access panel

27

Содержание Apollo 4530



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды