HPE Apollo 4530, Руководство по техническому обслуживанию и ремонту

Страница: 24 / 82

Before proceeding, verify that the server is in standby mode by observing that the system power LED is
amber.
Extend the chassis from the rack
Procedure
1. Extend the chassis from the rack as indicated.
Remove the chassis from the rack
WARNING:
The chassis is very heavy. To reduce the risk of personal injury or damage to the equipment:
• Observe local occupational health and safety requirements and guidelines for manual material
handling.
• Remove all installed components from the chassis before installing or moving the chassis.
• Use caution and get help to lift and stabilize the chassis during installation or removal, especially
when the chassis is not fastened to the rack.
WARNING:
To reduce the risk of personal injury or damage to the equipment, you must adequately support the
chassis during installation and removal.
WARNING:
Always have at least two people to lift the chassis into the rack. If the chassis is being loaded into
the rack above chest level, an additional person must assist with aligning the chassis with the rails
while the other people support the weight of the chassis.
Procedure
1. Power down all servers .
2. Disconnect the cable management arm .
3. Disconnect all peripheral devices from the chassis.
4. Remove the power supplies .
24 Extend the chassis from the rack