480
To configure a preferred value for routes from a peer or a peer group:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter IPv6 MBGP address
family view.
ipv6-family multicast
N/A
4.
Specify a preferred value for
routes received from the
IPv6 MBGP peer or the peer
group.
peer
{
ipv6-group-name
|
ipv6-address
}
preferred-value
value
Optional.
The preferred value defaults to 0.
Controlling route distribution and reception
Refer to the following information for details about controlling route distribution and reception.
Configuration prerequisites
Before you configure this task, complete the following tasks:
•
Enable IPv6.
•
Configure basic IPv6 MBGP.
Injecting a local IPv6 MBGP route
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter IPv6 MBGP address
family view.
ipv6-family multicast
N/A
4.
Inject a network into the IPv6
MBGP routing table.
network
ipv6-address
prefix-length
[
route-policy
route-policy-name
|
short-cut
]
Not injected by default.
Configuring IPv6 MBGP route redistribution
Step
Command
Description
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter IPv6 MBGP multicast
address family view.
ipv6-family multicast
N/A
4.
Enable default route
redistribution into the IPv6
MBGP routing table.
default-route imported
Optional.
Default route redistribution is not
allowed by default.
5.
Enable route redistribution
import-route
protocol
Not enabled by default.
