HPA B 215 Evo, Руководство оператора

Страница: 19 / 65

84
B 215 / B 225 Evo
Operator’s manual
- active sensor rounding-off (version with digital sensor);
- default geometric values: width = 5.5”, diameter = 14”, distance = 150 mm.
Now the operator can set the data of the wheel to be balanced or select one of the pro-
grammes available.
2. BALANCING PROGRAMME SELECTION
Before starting a balancing operation, the following steps must be followed:
- fit the wheel on the hub using the most suitable flange;
- lock the wheel so that no movement is possible during the wheel spin and braking
phases;
- remove any counterweight, pebble, dirt or other foreign body;
- set the wheel's geometric data correctly.
At start-up, by default, the wheel balancer executes the dynamic programme (dyn) which
uses clip weights on both sides.
The various balancing programmes can be recalled by simply selecting the keys
that represent the type of weight according to the rim and professional experi-
ence, both for the inner side as well as for the outer side.
The following balancing programmes are available:
Vehicle type
Balancing
programme
Inner weight application
type and mode
External weight applica-
tion type and mode
dyn
clip weight to apply
manually at the 12 o'clock
position
clip weight to apply
manually at the 12 o'clock
position
ALU 1P
Adhesive weight to apply
manually at the 12* o'clock
position or using weight
holder if present
adhesive weight to apply
manually at the 12* o'clock
position or using weight
holder if present
ALU 2P
clip weight to apply
manually at the 12 o'clock
position.
adhesive weight to apply
manually at the 12* o'clock
position or using weight
holder if present.
ALU 3
adhesive weight to
apply manually at the
12* o'clock position.
adhesive weight to
apply manually at the
12* o'clock position
ALU 4
clip weight to apply
manually at the 12 o'clock
position
adhesive weight to
apply manually at the
12* o'clock position.