![HPA B 215 Evo Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/hpa/b-215-evo/b-215-evo_operators-manual_2175535028.webp)
B 215 / B 225 Evo
Operator’s manual
93
UK
PLAN DETECTION BY LASERRAY POINTER
(IF PRESENTED)
Geometry data detection for real balancing plans for the ap-
plication of adhesive weights can be facilitated by the laser
line on the automatic detector lever.
To enable this line, it is necessary to press the button on the
automatic arm (A, Fig.15b).
The laser line remains visible inside the rim for 10 seconds,
then, if necessary, press the button on the automatic arm again.
5. ENTERING DIMENSIONS
IN THE MOTORCYCLE
PROGRAMMES
The operations described below are valid if the motor-
cycle setting (byke) has been activated in the "vehicle
type" set up.
- Fit the appropriate extension on the inner measuring
arm, specifically extension A on machines with no weight
holder or extension B on machines with weight holder
(Fig.16).
- To acquire the wheel dimensions, follow the instructions
in the paragraph “Entering wheel dimensions”.
6. WHEEL SPIN
Wheel spins take place by pressing the
key.
WARNING
To obtain the most accurate results, we recommend not improperly solicit the wheel bal-
ancer during the spin.
CAUTION
If the wheel keeps spinning permanently due to a fault on the machine, switch off the machine
using the main switch or disconnect the plug from the power supply board (emergency stop).
If the
key is pressed whilst the wheel is rotating, the spin will be prematurely inter-
rupted.
16
15b
Содержание B 215 Evo
Страница 63: ...128 B 215 B 225 Evo Operator s manual...
Страница 64: ...B 215 B 225 Evo Operator s manual 129 UK Notes...
Страница 65: ...130 B 215 B 225 Evo Operator s manual Notes...