HP ZBook Fury 17 G7 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 232

HP ZBook Fury 17 G7 Скачать руководство пользователя страница 5

Safety warning notice

Reduce the possibility of heat-related injuries or of overheating the computer by following the practices
described.

WARNING!

To reduce the possibility of heat-related injuries or of overheating the computer, do not place the

computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface.
Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs
or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface,
such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-
accessible surface temperature limits defined by applicable safety standards.

ENWW

v

«
...
3
4
5
6
7
...
»

Содержание ZBook Fury 17 G7









































































































































































































































Отзывы:

Нет отзывов