Hard drives
●
To verify the type, size, and capacity of the storage devices installed in the computer, run
Computer Setup (F10) Utility
.
●
The workstation supports only SATA hard drives.
●
The workstation requires one of the following supported carriers:
◦
671193-001 supports one 3.5-in hard drive
◦
671192-001 supports one or two 2.5-in hard drives
●
Combining a 2.5-in hard drive and 3.5-in hard drive is not possible.
●
No cable adapters are required for any hard drives. The cables necessary for all hard drive
configurations are included in the base system and automatically “blind mate” or “direct connect”
to the drive(s) when installed.
Handling hard disk drives
CAUTION:
Take proper precautions when handling hard disk drives to prevent loss of work and
damage to the computer or drive.
●
Do not remove hard drives from the shipping package for storage. Keep hard drives in their
protective packaging until they are mounted in the computer.
●
Always shut down the operating system, turn off the power, and unplug the power cord. Never
remove a drive while the computer is on or in standby mode.
●
Before handling a drive, make sure you discharge static electricity. While handling a drive, avoid
touching the connector.
●
Handle a drive carefully. Do not drop it from any height.
●
Do not use excessive force when inserting a drive.
●
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic
fields such as monitors or speakers.
●
If you must mail a drive, use a bubble-pack mailer or other protective packaging and label the
package “Fragile: Handle With Care.”
48
Chapter 3 Component replacement information and guidelines
Содержание Z1
Страница 1: ...HP Z1 Workstation Maintenance and Service Guide ...
Страница 4: ...iv About this guide ...
