1.
Turn on or restart the computer.
2.
As soon as the computer is turned on, repeatedly press the
F10
key until you enter Computer Setup
(F10) Utility.
If you do not press
F10
at the appropriate time, you must restart the computer, and then repeatedly
press
F10
to access the utility.
3.
Select Security > Create POST Power-On Password, and then follow the on-screen instructions.
4.
Before exiting, select Main > Save Changes and Exit.
Entering a power-on password
To enter a power-on password:
1.
Restart the computer.
2.
When the key icon appears on the monitor, enter the current password, and then press
Enter
.
Type carefully. For security reasons, the characters you enter do not appear on the screen.
If you enter the password incorrectly, try again. After three unsuccessful tries, you will enter the F10 setup
screen with read-only permission. (See the Setup Browse Mode option under the Power-On options.)
Entering a setup password
If a setup password has been established on the computer, you will be prompted to enter it each time you run
Computer Setup (F10) Utility.
To enter a setup password:
1.
Restart the computer.
2.
As soon as the computer is turned on, repeatedly press the
F10
key until you enter Computer Setup
(F10) Utility.
If you do not press
F10
at the appropriate time, you must restart the computer, and then repeatedly
press
F10
to access the utility.
3.
When the key icon appears on the monitor, enter the setup password, and press
Enter
.
Type carefully. For security reasons, the characters you enter do not appear on the screen.
If you enter the password incorrectly, try again. After three unsuccessful tries, you must restart the computer
before you can continue.
30
Chapter 2 System management
Содержание Z1 G3
Страница 1: ...HP Z1 G3 Workstation Maintenance and Service Guide ...
Страница 4: ...iv About this guide ...
