HP XP7, Руководство пользователя

Страница: 147 / 442

1. Click Select Pool VOLs .
2. In the Select Pool VOLs window, from the Available Pool Volumes table, select the pool-VOL
you want to assign, then click Add .
The selected pool-VOLs are registered in the Selected Pool Volumes table.
Up to 1024 volumes can be added including the volumes already in the pool.
NOTE: If necessary, perform the following steps:
•
From Filter option , select ON to filter the rows.
•
Click Select All Pages to select pool-VOLs in the table. To cancel the selection, click
Select All Pages again.
•
Click Options to specify the unit of volumes or the number of rows to be viewed.
•
To set the tier rank of an external volume to a value other than Middle , select a tier
rank from External LDEV Tier Rank , then click Add .
•
For a pool, you can add volumes whose Drive Type/RPM settings are the same and
whose RAID Level s are different. For example, you can add the following volumes
to the same pool:
Volume whose Drive Type/RPM is SAS/15K and whose RAID Level is 5 (3D+1P)
Volume whose Drive Type/RPM is SAS/15K and whose RAID Level is 5 (7D+1P)
3. Click OK .
The Select Pool VOLs window closes. The number of the selected pool volumes appears
in Total Selected Pool Volumes , and the total capacity of the selected pool-VOL appears
in Total Selected Capacity .
5. Click Finish .
6. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply .
If Go to tasks window for status is checked, the Tasks window opens.
Changing a pool name
The Storage Administrator (Provisioning) role is required to perform this task.
1.
In the Remote Web Console main window, in the Storage Systems tree, select Pool .
2. From the Pools table, select the pool with the name you want to change.
3. Click More Actions , then select Edit Pools .
4. In the Edit Pools window, in Pool Name , specify a name for this pool.
1. In Prefix , type the characters that will become the fixed characters for the beginning of
the pool name. The characters are case-sensitive.
2. In Initial Number , type the initial number that will follow the prefix name.
5. Click Finish .
6. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply .
If Go to tasks window for status is checked, the Tasks window opens.
Recovering a blocked pool
The Storage Administrator (Provisioning) role is required to perform this task.
This procedure is for failure recovery of a blocked pool. Ordinarily, you should not need to use
this procedure. A recovered pool can be used, but the former data is lost.
Managing pools and THP V-VOLs 147