HP XP7 Скачать руководство пользователя

Страница: 243 / 442

Description

Item

Snapshot: Fast Snap volume

Attribute of the volume indicating how the LDEV is being used.

Attribute

Command Device: Command device.

Remote Command Device.

JNL VOL: Journal volume.

Pool VOL: Pool volume. The number in parentheses is the pool identifier.

Quorum Disk: Quorum disk for High Availability.

TSE: TSE-VOL.

Hyphen (-): Volume in which the attribute is not defined.

Journal ID when the attribute is JNL VOL. A hyphen indicates the attribute is other than
JNL VOL.

Journal ID

Total number of selected LDEVs.

Total

Selected Ports table (when deleting ports)

Description

Item

Port IDs that to be deleted from the resource group.

Port ID

Attribute of the port indicating I/O flow.

Attribute

Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.

Target: Receives I/O commands from a host.

RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.

External: Issues I/O commands to a target port of an external storage system with
External Storage.

HTP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the external storage system.

FNP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the local storage system.

Total number of selected ports.

Total

Selected Host Groups table (when deleting Host Groups)

Description

Item

Port IDs that are used by the host group.

Port ID

Name and ID of each host group name to be deleted from the resource group.

Host Group Name

Some undefined host group names may appear. If a host group is not defined, the host
name is blank.

Total number of selected host groups.

Total

Remove Resources window 243

Содержание XP7



























































































































































































































































































































































































































































Результаты поиска

Содержание XP7

Отзывы:

Похожие инструкции для XP7

Бренды по названию

Популярные бренды

HP XP7, Руководство пользователя

Результаты поиска

Содержание XP7

Отзывы:

Похожие инструкции для XP7

Бренды по названию

Популярные бренды