HP VMA SAN, Руководство по установке и настройке

Страница: 50 / 83

50 HP VMA SAN Gateway Installation and Configuration Guide AM456-9025A
Configuring Storage Containers
The first step in configuring a vSHARE HP VMA SAN Gateway is to format the HP VMA-series
Arrays and create the containers needed to manage LUNs in the target storage on each Memory
Array. LUNs are addressable subsets of the container in a Memory Array. When a LUN is created,
it is assigned to a specific container and inherits the attributes of that container.
Note:
As of this release, one container comprises a HP VMA-series Array.
Initializing HP VMA-series Arrays
To configure a HP VMA-series Array to support block storage, first initialize the HP VMA-series
Array using the
media init
command.
Command Syntax and Parameters
This section describes the
media init
command syntax and available parameters.
Syntax
media init device <VIOLIN_MEMORY_ARRAY_xxxxxxxxxxxxxx> type [block]
[force][name]
WARNING!
Using the
force
option of the
media init
command (
media init <device_name>
<block_name> force
) destroys the existing data on a Memory array. You should not use this command
on a previously initialized Memory Array without first backing up the data on the Memory Array.
Parameters
device <device>
The
<device>
parameter indicates the Memory Array to be
initialized and is a string of the form:
ata-
VIOLIN_MEMORY_ARRAY_xxxxxxxxxxxxxx
type
The
type
parameter defines media, such as
block
(vSHARE).
name
The name parameter is used to name the partition. The default is to
use the last 14 characters of the HP VMA-series Array serial number.
To use a different name, add this parameter followed by a custom
name of up to 14 alphanumeric characters in length.
force
The
force
parameter is used to force initialization of a HP VMA-
series Array that has already been initialized.