HP VMA SAN, Руководство по установке и настройке

Страница: 31 / 83

AM456-9025A HP VMA SAN Gateway Installation and Configuration Guide 31
The following table lists the recommended software and settings for optimum performance of the
VMA Gateway Web Interface.
Accessing the VMA Gateway Web Interface
You must use a supported browser with JavaScript and cookies enabled, as described in Supported
Web Browsers on page 28.
To access the VMA Gateway Web Interface, do the following:
1.
Open a (supported) browser window.
2.
Enter the following URL in the address field, substituting the variable in <brackets> with the
actual value for your system.
http://
<Gateway_IP_address_or_hostname>
The log in page appears.
3.
Log in as admin user.
For more information, see the HP VMA SAN Gateway User’s Guide.
Verifying vSHARE and Other Licenses
This section demonstrates how to verify that vSHARE and other installed licenses are active on the
HP VMA SAN Gateway.
To verify the vSHARE and other installed licenses, do the following:
1.
Log in to the master node as admin and enter enable mode.
Recommendation Description
Display resolution The minimum recommended display resolution for the
VMA Web Interface is 1024 by 768 pixels.
JavaScript JavaScript must be enabled for the VMA Gateway Web
Interface.
Adobe Flash Player Adobe Flash Player version 8 (or above) is required for
viewing charts in the VMA Gateway Web Interface.
Cookies Enable cookies for login and session management. Cookies
are also used to store dashboard page settings.
Table 2.4 Recommended for the VMA Gateway Web Interface
login as: admin
{cluster: master} > enable
#