Connection 2: Connecting with regular TV or cable TV without a receiver
NOTE:
Computer features may vary. Cable lengths are not shown to scale.
To connect the TV tuner to your regular TV or cable TV source without a receiver, follow these steps:
1.
Insert the TV tuner
(1)
into a USB port on the computer.
NOTE:
Due to power and bandwidth requirements, do not insert the TV tuner into a USB hub.
2.
Connect an RF coaxial cable (purchased separately) to the TV tuner
(2)
and then to your regular
TV or cable TV wall jack
(3)
.
3.
Connect the remote sensor to a USB port on the computer. Refer to
Step 5: Connect the remote
sensor and infrared (IR) emitter cable on page 12
, for details.
NOTE:
For additional connection steps, such as adding a television, refer to Chapter 4,
Advanced
connections on page 17
.
Connection 3: Connecting with satellite TV or cable TV with a receiver
NOTE:
Refer to the manufacturer's instructions provided with your cable or satellite receiver for the
exact location and labeling of components on the receiver.
NOTE:
Computer features may vary. Cable lengths are not shown to scale.
10
Chapter 3 TV tuner setup
Содержание USB TV Tuner
Страница 1: ...HP USB Digital Analog TV Tuner User Guide ...
Страница 43: ......
