HP UPS Network Module Скачать руководство пользователя страница 75

Страница: 75 / 88

Troubleshooting 75

Troubleshooting

Client communication failure with HP UPS Network

Module in a VMware operating system

Possible Cause:

The Client was installed on the guest operating system.

Action:

Install the Client on the host VMware operating system (for ESX) or on VIMA/VMA (for ESXi). Do not

install the Client on the guest operating system. When the Client receives a shutdown notification from the HP

UPS Network Module, it sends an operating system shutdown command to the VMware host operating
system, and then the VMware shuts down the guest operating system based on a preset configuration.

Client server is not restarting

Symptom:

Utility power has been restored, the UPS and its load segments are powered on, but the Client

server does not restart.

Possible Cause:

The “Automatic Power ON” server setup setting might be disabled.

Action:

In the server system BIOS, change the setting for Automatic Power ON to "Enabled."

Clients cannot communicate with UPS after swapping

HP UPS Network Module with another UPS

Possible Cause:

The HP UPS Network Module and Clients are configured with an old power source.

Action:

Reconfigure the HP UPS Network Module power source, and then reconfigure the Client power

source.

Failure to communicate with the serial or USB ports

Symptom:

There is a failure to communicate with the serial or USB ports while upgrading the UPS or

CommBoard firmware.

Possible Cause:

A UPS Network Module is installed in the UPS minislot.

Action:

Remove the UPS Network Module from the UPS minislot when upgrading the firmware using the serial

or USB ports.

Forgot login password

Action:

To reset the login password, use the supplied serial cable to connect to the UPS Network Module

through a terminal emulation programs, such as HyperTerminal, with the following parameters:

Содержание UPS Network Module

























































































Результаты поиска

Содержание UPS Network Module

Отзывы:

Похожие инструкции для UPS Network Module

Бренды по названию

Популярные бренды

HP UPS Network Module, Руководство пользователя

Результаты поиска

Содержание UPS Network Module

Отзывы:

Похожие инструкции для UPS Network Module

Бренды по названию

Популярные бренды