HP UPS Network Module Configuration Menu 46
HP UPS Network Module Configuration Menu
HP UPS Network Module Configuration Menu
overview
The HP UPS Network Module Configuration Menu provides an alternative, limited interface to the UPS
Network Module. System network values can be configured through the Configuration Menu and saved to
the UPS Network Module.
NOTE:
All parameters included in the UPS Network Module Configuration Menu can also be
configured using the HP UPS Network Module web interface ("
HP UPS Network Module web
interface overview
" on page
16
).
Accessing the Service Menu
You can access the Configuration Menu locally by launching a terminal emulation program (on page
14
).
On the terminal emulation session screen running on the host computer:
1.
Press any key. The initialization process completes, and you are prompted to enter the password.
2.
At the prompt, enter
admin
. The HP UPS Network Module Configuration Menu appears.
Navigating the menus
After you have successfully initiated a terminal emulation session, the UPS Network Module Configuration
Menu appears.
•
Open a submenu by entering the corresponding option number at the prompt.
•
To enter or change configuration information, follow the on-screen prompts.
•
Enter
0
at the submenu prompt to go to the previous menu.
-or-
Enter
0
at the Main menu prompt to exit the utility.
•
Press the
Enter
key to refresh the screen.
•
You must restart the UPS Network Module to allow configuration changes to take effect.
Main menu
This menu only appears when accessing the UPS Network Module using a terminal emulation program.
Option number
Submenu
Description
1
Reset
Resets the UPS Network Module
Содержание UPS Network Module
Страница 60: ...Firewall configuration 60 13 Click Change scope to add more security to the port exception ...
Страница 63: ...Firewall configuration 63 ...
Страница 68: ...Alert messages 68 UPS Site Wiring Fault UPS Site Wiring Fault Cleared ...
Страница 82: ...Regulatory compliance notices 82 Class B equipment BSMI notice ...