HP t630 Thin Client Скачать руководство пользователя

Страница: 46 / 58

Using HP ThinUpdate to restore the image

HP ThinUpdate allows you to download images and add-ons from HP, capture an HP thin client image, and
create bootable USB flash drives for image deployment.

HP ThinUpdate is preinstalled on some HP thin clients, and it is also available as an add-on at

http://www.hp.com/support

(search for the thin client model and see the Drivers & software section of the

support page for that model).

●

The Image Downloads feature lets you download an image from HP to either local storage or a USB flash

drive. The USB flash drive option creates a bootable USB flash drive that can be used to deploy the image
to other thin clients.

●

The Image Capture feature lets you capture an image from an HP thin client and save it to a USB flash

drive, which can be used to deploy the image to other thin clients.

●

The Add-on Downloads feature lets you download add-ons from HP to either local storage or a USB flash

drive.

●

The USB Drive Management feature lets you do the following:

—

Create a bootable USB flash drive from an image file on local storage

—

Copy an .ibr image file from a USB flash drive to local storage

—

Restore a USB flash drive layout

You can use a bootable USB flash drive created with HP ThinUpdate to deploy an HP thin client image to another
HP thin client of the same model.

Appendix C Using HP ThinUpdate to restore the image

Содержание t630 Thin Client



























































Результаты поиска

Содержание t630 Thin Client

Отзывы:

Похожие инструкции для t630 Thin Client

Бренды по названию

Популярные бренды

HP t630 Thin Client, Руководство по устранению неисправностей

Результаты поиска

Содержание t630 Thin Client

Отзывы:

Похожие инструкции для t630 Thin Client

Бренды по названию

Популярные бренды