The new owner of the segment must be able to see the same storage as the original owner. The
Change Segment Owner dialog box lists the servers that can see the segment you selected. Select
one of these servers to be the new owner.
The Summary dialog box shows the segment migration you specified. Click
Back
to make any
changes, or click
Finish
to complete the operation.
To migrate ownership of segments from the CLI, see the
ibrix_fs
command in the HP StoreAll
OS CLI Reference Guide.
Evacuating segments and removing storage from the cluster
Before removing storage used for a StoreAll software file system, you will need to evacuate the
segments (or logical volumes) storing file system data. This procedure moves the data to other
segments in the file system and is transparent to users or applications accessing the file system.
When evacuating a segment, you should be aware of the following restrictions:
•
While the evacuation task is running, the system prevents other tasks from running on the file
system. Similarly, if another task is running on the file system, the evacuation task cannot be
scheduled until the first task is complete.
•
The file system must be quiescent (no active I/O while a segment is being evacuated). Running
this utility while the file system is active may result in data inconsistency or loss.
To evacuate a segment, complete the following steps:
1.
Identify the segment residing on the physical volume to be removed. Select
Storage
from the
Navigator on the GUI. Note the file system and segment number on the affected physical
volume.
2.
Locate other segments on the file system that can accommodate the data being evacuated
from the affected segment. Select the file system on the GUI and then select
Segments
from
the lower Navigator. If segments with adequate space are not available, add segments to the
file system.
3.
Evacuate the segment. Select the file system on the GUI, select
Segments
from the lower
Navigator, and then click
Rebalance/Evacuate
on the Segments panel. When the Segment
Rebalance and Evacuation Wizard opens, select
Evacuate
as the mode.
Managing segments
101
