ESL9000 Series Tape Library Unpacking and Relocating Guide
5–5
Relocation
Crating the Library
Use this section:
•
If you need to ship the library to the new site.
•
If you need to transport the library by forklift or similar means.
If you are moving the library within a facility, see “Preparing the Library for
Operation,” described later in this chapter.
Crating Instructions
To crate the library for a new site:
CAUTION:
The library weighs approximately 985 pounds (447 kg) for the ESL9198,
approximately 1072 pounds (487 kg) for the ESL9322, approximately 1300 pounds
(590 kg) for the ESL9326, and approximately 1444 (655 kg) for the ESL9595. Use at
least two people to perform any steps that involve lifting or guiding the library. Use safe
practices when lifting or guiding the library and handling the ramp.
1. Prepare the shipping pallet for the library.
a.
Attach the two ramp extensions to the pallet.
b.
Place the wooden support bar underneath the ramp extensions.
c.
Attach the metal stop blocks to the left side of the pallet to help prevent the
library from rolling off the end.
2. Place the library on the pallet.
a.
Raise the library support feet.
b.
With the help of at least one person, roll the library to a position in front of the
pallet ramp.
c.
Roll the library onto the pallet.
d. Remove the left side stop blocks and replace the wooden bar.