2–6
ESL9000 Series Tape Library Unpacking and Relocating Guide
Selecting an Installation Location
Power and Grounding
The tape library is rated for 100-240 VAC~, 50-60 Hz, 16 A-8 A, 1600 W service
(1200 W for the ESL9198 and ESL9322). A dedicated outlet and a 20 amp circuit
breaker must provide power to the tape library. In addition, it is necessary to use a
harmonized 3 x 1.5mm
2
power cord approved by the associated country of use with
the appropriate wall outlet. For important safety information about hp products and
power cords, refer to the
Important Safety Information
booklet.
Figure 2–5: Wall outlet requirements for North America
1
Neutral
2
Line
3
Ground
NOTE:
The tape library contains redundant power supplies. As a result, two wall outlets
are required.
WARNING: The library must be connected to a grounded electrical outlet.
Failure to properly connect the library to a grounded electrical outlet could
result in personal injury and/or equipment damage.
3
2
1
