HP StorageWorks ESL9000 Series Скачать руководство пользователя страница 58

Страница: 58 / 66

5–4

ESL9000 Series Tape Library Unpacking and Relocating Guide

Relocation

NOTE:

More than one technician might be required to assist this operation.

5. Attach the shipping plate that protects the load port (see Figure 5-1). The load port

is located in the right door of the library.

Attach the shipping plate and cardboard to the load port.

Insert the bolts and washers that secure the plate to the load port and secure
them using the screws provided during the unpacking procedure. See Chapter
4, “Unpacking and Moving the Library,” for further instructions.

Figure 5–1: Inserting the shipping plate

Disconnecting Library Cables

To disconnect library cables:

1. Disconnect SCSI cables and terminators.

2. Disconnect the power cord from the outlet and the power distribution assembly of

the library.

3. Pack all cables with other library accessories.

SHR-1775

SHR-1911

Содержание StorageWorks ESL9000 Series



































































Результаты поиска

Содержание StorageWorks ESL9000 Series

Отзывы:

Похожие инструкции для StorageWorks ESL9000 Series

Бренды по названию

Популярные бренды

HP StorageWorks ESL9000 Series, Руководство пользователя

Результаты поиска

Содержание StorageWorks ESL9000 Series

Отзывы:

Похожие инструкции для StorageWorks ESL9000 Series

Бренды по названию

Популярные бренды