Installing and Configuring the Director
104
Director 2/64 Installation Guide
8. Enter the interval in minutes in which throughput is measured and threshold
notifications can occur. The valid range is 5 minutes to 70,560 minutes.
9. Click Next. A new screen displays for selecting ports for the alerts, as shown
in
Figure 56: New Threshold Alerts dialog box—third screen
10. Choose either Port Type or Port List.
■
For Port Type, choosing either E_Ports or F_Ports will cause this alert to
generate for all ports configured as E_Ports or F_Ports, respectively.
■
For Port List, you can choose individual ports by clicking the check box
by each port number or set all ports. Selecting Set All Ports places a
check mark by each port number. Selecting Clear All Ports will clear the
check marks by each port number.
11. Click Next. A final screen displays to provide a summary of your alert
configuration, as shown in
