HP StorageWorks Director 2/64 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 146

background image

Installing and Configuring the Director

112

Director 2/64 Installation Guide

Using HAFM from a Remote Location

Using a standard Web browser, the client HAFM and Director Element Manager
can be downloaded and installed on PCs or workstations that are LAN-attached to
the HAFM appliance. Operators at these platforms can manage and monitor
directors or switches controlled by the appliance. A maximum of 25 concurrent
users can log in to the HAFM appliance.

Each client must have access to the LAN segment on which the HAFM appliance
is installed. Director administrative functions are accessed through the LAN and
appliance. Use this section to install the HAFM client on a remote workstation.

Remote Workstation Minimum Requirements

The Client HAFM and Element Manager download and install to remote
workstations (from the HAFM appliance) using a standard Web browser. The
applications operate on platforms that meet the following minimum system
requirements:

■

Desktop or notebook PC with color monitor, keyboard, and mouse, using an
Intel Pentium III processor with a 700 MHz or greater clock speed, and using
the Microsoft Windows

2000 (with service pack 5 or higher), Windows NT

4.0 (with service pack 6a), or Windows

2003 operating system.

Note:

In order for HAFM to function properly, compatible versions must be installed on

both the client and server machines.

■

UNIX

®

Workstation with color monitor, keyboard, and mouse using:

— Linux-based system using an Intel Pentium III processor with a 1

gigahertz (GHz) or greater clock speed, using the Red Hat® 7.3 or higher
operating system.

— Hewlett-Packard PA-RISC processor with a 400 MHz or greater clock

speed, using the HP-UX 11 or higher operating system.

— Sun Microsystems

®

UltraPARC-II processor with a 300 MHz or greater

clock speed, using the Solaris Version 7.0 or higher operating system.

— IBM POWER3-II

®

microprocessor with a 333 MHz or greater clock

speed, using the AIX Version 4.3.3 or higher operating system.

■

At least 150 MB (Windows-based) or 350 MB (UNIX-based) available on the
internal hard drive.

«
...
110
111
112
113
114
...
»

Содержание StorageWorks Director 2/64



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks Director 2/64

Бренд: NEC Страницы: 168

Бренд: A SYSTEMS Страницы: 16

Бренд: NETGEAR Страницы: 15

Бренд: BeeSecure Страницы: 35

Бренд: Comprehensive Страницы: 6

Бренд: Mach Power Страницы: 12

Бренд: Samson Страницы: 64

Бренд: NTI Страницы: 69

Guard Master 440N-Z2NRS1A

Бренд: Allen-Bradley Страницы: 4

iServer MicroServer EIS-2B

Бренд: Omega Страницы: 68

Бренд: Eminent Страницы: 6

Бренд: Leviton Страницы: 2

Бренд: Byte Delight Страницы: 12

IDAN-LAN25255HR

Бренд: rtd Страницы: 24

EX78900X Series

Бренд: EtherWAN Страницы: 2

Бренд: UHPPOTE Страницы: 10

Emulation Pod M306V2T-RPD-E

Бренд: Renesas Страницы: 74

Бренд: Kramer Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды