Installing and Configuring the Director
98
Director 2/64 Installation Guide
Use these steps to configure and enable e-mail and SMTP server addresses:
1. At the HAFM main page, choose Monitor > Event Notification > E-Mail.
The E-Mail Event Notification Setup dialog box displays, as shown in
.
Figure 49: E-Mail Event Notification Setup dialog box
2. To enable e-mail transmission of configured addresses, click Enable E-Mail
Event Notification. A check mark displays in the box when transmission is
enabled.
Note:
The enable function must also be activated for each director or switch through
the Element Manager. E-mail notification can be active for some directors or switches
and inactive for others.
3. Enter the IP address or DNS host name of the SMTP server in the E-mail
Server field. Use 64 or fewer alphanumeric characters.
4. Enter the e-mail address to which e-mail replies should be sent in the Reply
field.
5. At the Interval field, enter the length of time the application should wait
between notifications. Choose seconds, minutes, or hours from the
associated drop-down list.
6. To specify users that are to receive e-mail notification, click User List. The
HAFM 8 Server Users dialog box displays, as shown in
.
