Command Reference
79
HP StorageWorks NAS 8000 Command Reference
getClusterPackagePrimaryOwner
Gets from the registry, the name of the node that owns the package.
■
InParam[0] = Package name
■
OutParam[0] = Primary owning node of the package
setClusterPackagePrimaryOwner
Required. Sets in the registry, the name of the node that owns the package. Running
‘startClusterPackage packageName’ without a nodeName argument, starts the package on
the primary owning node.
■
InParam[0] = Package name
■
InParam[1] = Node name
getClusterPackageCurrentOwner
Gets the name of the node that is currently running the package.
■
InParam[0] = Package name
■
OutParam[0] = Node name
getClusterPackageAdoptiveNodeList
Gets a list of the nodes that are allowed to run the package in a failover situation.
■
InParam[0] = Package name
■
OutParam[0:N] = Node name list
getClusterPackageVirtualIpAddressList
Gets from the registry, the VirtualIpAddress/Subnet values served by this package.
■
InParam[0] = Package name
■
OutParam[0:N] = VirtualIPAddress/Subnet list
setClusterPackageVirtualIpAddressList
Required. Sets the given VirtualIpAddress/Subnet list for the given package.
■
InParam[0] = Package name
■
InParam[1:N] = VirtualIpAddress/Subnet entries
For example:
■
setClusterPackageVirtualIpAddressList pkg1 192.168.100.21/192.168.100.0
getClusterPackageVolumegroupList
Gets from the registry, the list of volume groups managed by this package.
■
InParam[0] = Package name
■
OutParam[0:N] = Volume group list
setClusterPackageVolumegroupList
Required. Sets in the registry, the list of volume groups to be managed for the given package.
■
InParam[0] = Package name
■
InParam[1:N] = Volume group list
For example: