HP StorageWorks 8000 - NAS, Справочник по командам, Страница: 61 / 96

Command Reference
61 HP StorageWorks NAS 8000 Command Reference
■
inParam[0] = Time [24HH:MM:SS] or “NOW”
getSystemTimezoneCurrentGmt
■
outParam[0] = GMT value
getSystemTimezoneEnabled
Informs whether time zones are enabled on the HP NAS 8000.
■
inParam[0] = Time zone name
■
outParam[0] = Enable status
setSystemTimezoneEnabled
Enables time zone support.
■
inParam[0] = Time zone name
■
inParam[1] = Enable
getSystemTimezoneCurrentDescription
Displays the current time zone setting description.
■
inParam[0] = Time zone name
■
outParam[0] = Time zone description
getSystemTimezoneCurrentCountry
Displays the current time zone country.
■
inParam[0] = Time zone name
■
outParam[0] = Time zone country
getSystemTimezoneList
Displays the available time zone names.
■
outParam[0:N] = Time zone names
getSystemTimezoneCurrentName
Displays the current system time zone.
■
inParam[0] = Time zone name
getSystemTimezoneCurrentGmt
Displays the offset from GMT for the current system time zone.
■
outParam[0] = Offset in hours
Example: -0700
System NTP Settings
The following commands are used to set the Network Time Protocol (NTP) and choose a
server with which the NAS 8000 can synchronize system time.
addSystemNtpServer
Adds a server to the list of hosts from which to get NTP time synchronization information.