Command Reference
35
HP StorageWorks NAS 8000 Command Reference
■
inParam[0] = VA7xxx DASD name
■
inParam[1] = Redundancy group (* for all redundancy groups).
■
inParam[2] = Units (B,MB,GB)
■
outParam[0] = Included capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxRedundantCapacity
Returns the redundant capacity – that is, the space used for data redundancy for the current
RAID setting – on the specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
scanStorageDasdScsiVa7xxx
Updates the list of arrays connected to the HP NAS 8000 system. Used when devices are
added or removed.
■
inParam[0] = SCSI VA7xxx DASD name
shutdownStorageDasdScsiVa7xxx
Shuts down the specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
restartStorageDasdScsiVa7xxx
Restarts the specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
getStorageDasdScsiVa7xxxLunList
Returns a list of LUNs on the specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
outParam[0:N] = LUN number list
getStorageDasdScsiVa7xxxLunMinimumCapacity
Returns the minimum size that can be used to create a LUN.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = LUN minimum capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxLunCapacityIncrement
LUN sizes must be defined using this increment. Default is 1MB.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = LUN capacity increment (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxLunMinimumNumber
Returns the minimum allowed LUN number. Currently 1.