Command Reference
78
HP StorageWorks NAS 8000 Command Reference
startClusterPackage
Starts the package on the primary owning node, or if nodeName is given, then on that node.
The volume group(s) associated with the package are activated on the node running the
package. If the volume groups have previously defined volumes and shares, then those are
activated.
■
InParam[0] = Package name
■
InParam[1] = Node name
stopClusterPackage
Stops the package wherever it is running. The volume group(s) and all associated storage that
belong to the package are deactivated on the node running the package.
■
InParam[0] = Package name
deleteClusterPackage
Deletes the package configuration from the cluster and the registry. The volume group(s) and
all associated storage that belonged to the package are not affected. They are deactivated, but
still exist.
■
InParam[0] = Package name
relocateClusterPackage
Stops the package on the current node and starts it up on the given node. Sets the value of
PrimaryOwner to the new given node and applies the updated configuration.
■
InParam[0] = Package name
■
InParam[1] = Node name
failoverClusterPackage
Stops the package on the current node and starts it up on the given node.
■
InParam[0] = Package name
■
InParam[1] = Node name
failbackClusterPackag
Stops the package on the current node and starts it up on the Primary owning node.
■
InParam[0] = Package name
setClusterPackageEnabled
Enables or disables the package from running on the given node. If a package is disabled from
running on an alternate node, then it cannot failover to that node.
■
InParam[0] = Package name
■
InParam[1] = Node name
■
InParam[2] = T (enabled) or F (disabled)
getClusterPackageNameList
Gets the complete list of package names that have been created on the cluster, whether running
or not.
■
OutParam[0:N] = List of package names