HP StorageWorks 8000 - NAS, Справочник по командам, Страница: 34 / 96

Command Reference
34 HP StorageWorks NAS 8000 Command Reference
■
outParam[0] = Minimum redundancy group
getStorageDasdScsiVa7xxxRedundancygroupMaximumNumber
Returns the highest numbered redundancy group of a VA7xxx array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Redundancy group
■
outParam[0] = Maximum redundancy group
getStorageDasdScsiVa7xxxTotalCapacity
Returns the total raw capacity of the specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxUnallocatedCapacity
Returns the unallocated capacity – that is, space not included in volume groups - for the
specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxAllocatedCapacity
Returns the allocated capacity – that is, space included in volume groups – for the specified
storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxActiveSpareCapacity
Returns the capacity of the active spare on the specified storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxUnincludedCapacity
Displays the unincluded capacity – that is, space not included in LUNs – of the specified
storage array.
■
inParam[0] = SCSI VA7xxx DASD name
■
inParam[1] = Units (B,MB,GB)
■
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxIncludedCapacity
Gets the included capacity of a redundancy group on a VA7xxx storage array. Included
capacity is the sum of the capacities of all disk drives that are in use.