Chapter 1: Component identification
9
Callout
Item
Description
13
10 Gb ports # 1, 2
Two 10 Gb ports numbered 1 and 2, from right to left.
Use interfaces 1 and 2 for the Hewlett Packard Enterprise
federation network.
Specifications
There are optimium environment and technical specifications for the HPE SimpliVity 380. The specifications help
you when planning the appropriate installation location, environmental conditions, and resources such as power
and cooling. See the product QuickSpec for the latest information on system specifications.
Vibration and shock
The server configured for deployment in a HPE OmniStack federation does not exceed the vibration and shock
limit specifications for a fully-configured server.
Agency compliance
An HPE SimpliVity 380 server, when configured for deployment in an HPE OmniStack federation, meets the same
compliance standards as a standard HPE server.
Component upgrades
If you need to upgrade the server components, contact
Customer Support (http://www.hpe.com/support/
hpesc)
.
WARNING:
Never install additional options other than those approved for installation by
Customer Support (http://
www.hpe.com/support/hpesc)
. Doing so will void your warranty and might cause serious server instability
and potential data loss.
Firmware revisions
HPE OmniStack software requires that each supported platform is running a specific firmware revision.
To avoid compatibility issues, contact
Customer Support (http://www.hpe.com/support/hpesc)
before making
any firmware changes.
NOTE:
If your server, or any management software, has automatic software updates enabled, disable this feature to
avoid installing unsupported firmware revisions.