HP SimpliVity 380 Gen9 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 41

HP SimpliVity 380 Gen9 Скачать руководство пользователя страница 10

Chapter 2: Install the server components

10

Chapter 2: Install the server components

This section contains the following topics:

•

Electrostatic discharge

•

Shipping carton contents

•

Components not supplied in the shipping carton

•

Rack requirements

•

Rack installation guidelines

•

Install the server in a rack

•

Connect the power cables

•

Connect the network cables

•

Organize the cables

•

Power up the server

To install the server components, you must unpack all components, install the server in a rack, connect the power

and network cables, and power on the system.

Electrostatic discharge

You must protect sensitive components from electrostatic discharge (ESD).
To protect components from ESD:
• Ensure the component is fully grounded at all times to prevent damage from electrostatic discharge.
• When not installed in a rack, store server components in the original packaging or place on a sturdy surface

that is protected from electrostatic discharge.

• When handling server components, always use the electrostatic wrist strap provided or a similar form of ESD

protection.

Shipping carton contents

The shipping carton contains standard items and other items based on your configuration.

Part

Description

Server

Provides processing power and storage capacity.

Power cords

• Two standard power cords.
• Two IEC C13/C14 (PDU) cords.

Rack-mounting hardware (optional)

Contains the left and the right rails and detailed installation

documentation.

Cable Management Arm (CMA) kit (optional)

Contains the CMA assembly and installation documentation.

«
...
8
9
10
11
12
...
»

Содержание SimpliVity 380 Gen9










































Отзывы:

Нет отзывов