Removal and replacement procedures 51
7.
Close the DIMM bracket.
To replace the component, reverse the removal procedure.
Removing and replacing a processor heatsink
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the heatsink to cool
before touching it.
CAUTION:
To avoid damage to the heatsink, do not touch the edge where the heatsink
aligns with the water wall.
To remove the component:
1.
Power down the server (on page
2.
Disconnect all peripheral cables from the server.
3.
Remove the server (on page
4.
Remove the access panel (on page
5.
Remove the processor heatsink:
Содержание ProLiant XL730f Gen9 Server
Страница 8: ...Component identification 8 Server numbering in rack Serial label pull tab ...
Страница 14: ...Operations 14 2 Slide the access panel toward the front of the server The access panel locks into position ...
Страница 68: ...Acronyms and abbreviations 68 UEFI Unified Extensible Firmware Interface UID unit identification ...
