HP ProLiant XL730f Gen9 Server, Руководство пользователя и по обслуживанию, Страница: 49 / 72

Removal and replacement procedures 49
•
Observe the general DIMM slot population guidelines (on page 48 ).
•
DIMMs may be installed individually.
Online spare population guidelines
For Online Spare memory mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page 48 ).
•
Each channel must have a valid online spare configuration.
•
Each channel can have a different valid online spare configuration.
•
Each populated channel must have a spare rank. A single dual-rank DIMM is not a valid
configuration.
Population order
For memory configurations with a single processor or multiple processors, populate the DIMM slots
sequentially in alphabetical order (A through H).
After installing the DIMMs, use UEFI System Utilities (on page
23 ) to configure supported AMP modes.
DIMM tool location
The DIMM tool is used to open and close the DIMM release latch.
Replacing the DIMM
To remove the component:
1.
Power down the server (on page 10 ).
2.
Disconnect all peripheral cables from the server.
3.
Remove the server (on page 11 ).
4.
Remove the access panel (on page 12 ).
5.
Remove the DIMM cover: