Removal and replacement procedures 40
5.
Cut the tie wraps securing the cables, and then disconnect the cables.
6.
Remove the power supply.
To replace the component, reverse the removal procedure.
Drive cage
IMPORTANT:
The drive cage is not compatible with the HPE Infiniband 544 FlexibleLOM
adapter. The adapter will cause physical interference, preventing installation of the drive cage.
To remove the component:
1.
Power down the server (on page
2.
Disconnect all peripheral cables from the server.
3.
Remove the server (on page
4.
Remove the access panel (on page
Содержание ProLiant XL730f Gen9 Server
Страница 8: ...Component identification 8 Server numbering in rack Serial label pull tab ...
Страница 14: ...Operations 14 2 Slide the access panel toward the front of the server The access panel locks into position ...
Страница 68: ...Acronyms and abbreviations 68 UEFI Unified Extensible Firmware Interface UID unit identification ...