![background image](http://html.mh-extra.com/html/hp/proliant-ws460c-g6-workstation-blade/proliant-ws460c-g6-workstation-blade_user-manual_2175213046.webp)
Software and configuration utilities 46
o
Copy the image of the boot diskette to a location on the network or the client PC hard drive.
2.
Remotely access the workstation blade through iLO 2. See "HP BladeSystem c-Class advanced
management (on page
40
)."
3.
Click the
Virtual Media
tab.
4.
Select the
Virtual Media
applet.
5.
Use the Virtual Media applet to select the local diskette or image file and connect the Virtual CD to
the workstation blade.
6.
Use the iLO 2 Virtual Power Button feature to reboot the workstation blade.
7.
After the workstation blade boots, follow the normal network installation procedure for the OS.
SAN configuration
The workstation blade provides FC support for SAN implementations. This solution uses an optional FCA
that offers redundant SAN connectivity and optimization for HP StorageWorks products. The workstation
blade is also compatible with certain third-party SAN products. For more information, refer to the
documentation that ships with the FCA option.
For optimal SAN connectivity, observe the following guidelines:
•
The FCA option is installed correctly in the workstation blade. Refer to the documentation that ships
with the FCA option.
•
An FC-compatible interconnect is installed in the enclosure. Refer to the documentation that ships
with the interconnect option.
•
The server blade enclosure management module firmware is up-to-date. Refer to the HP Business
Support Center website (
http://www.hp.com/support
).
•
The workstation blade is cabled properly to a supported SAN.
•
SAN storage drivers are loaded. Refer to supporting white papers and the HP website
(
http://www.hp.com/servers/rdp
).
For SAN configuration information for the workstation blade, refer to the
HP StorageWorks SAN Design
Reference Guide
on the HP website
(
http://h18000.www1.hp.com/products/storageworks/san/documentation.html
).
Configuration tools
SmartStart software
SmartStart is a collection of software that optimizes single-server setup, providing a simple and consistent
way to deploy server configuration. SmartStart has been tested on many ProLiant server products,
resulting in proven, reliable configurations.
SmartStart assists the deployment process by performing a wide range of configuration activities,
including:
•
Configuring hardware using embedded configuration utilities, such as RBSU and ORCA
•
Preparing the system for installing "off-the-shelf" versions of leading operating system software
•
Installing optimized server drivers, management agents, and utilities automatically with every
assisted installation
Содержание ProLiant WS460c G6 Workstation Blade
