HP ProLiant WS460c G6 Workstation Blade, Руководство пользователя

Страница: 13 / 101

Operations 13
standby mode without exiting applications and the OS. This is an emergency method to force a
shutdown in the event of a hung application.
•
Use the Onboard Administrator GUI to initiate a shutdown:
a.
Select the Enclosure Information tab, then select the Overall checkbox in the Device Bays item.
b.
Initiate a shutdown from the Virtual Power menu:
—
Select Momentary Press to initiate a controlled shutdown of applications and the OS.
—
Select Press and Hold to initiate an emergency shutdown of applications and the OS.
IMPORTANT: When the workstation blade are in standby mode, auxiliary power is still being
provided. To remove all power from the workstation blade, remove the workstation blade from
the enclosure.
After initiating a virtual power down command, be sure that the workstation blade go into standby mode
by observing that the system power LED is amber.
Remove the workstation blade
CAUTION: Do not use the workstation blade release lever to lift or carry the workstation blade.
Always support the weight of the workstation blade by handling the chassis directly. Improper
use can damage the release lever and the workstation blade.
To remove the component:
1.
Identify the proper workstation blade.
2.
Power down the workstation blade (on page 12 ).
3.
Remove the workstation blade.
4.
Place the workstation blade on a flat, level work surface.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.