HP ProLiant SL4545 G7, Руководство по техническому обслуживанию и ремонту

Страница: 28 / 61

Removal and replacement procedures 28
Processor air baffle
To remove the component:
1.
Power down the node (on page 21 ).
2.
Remove the node from the chassis (" Remove a node from the chassis " on page 22 ).
3.
Remove the access panel (on page 23 ).
4.
Remove the processor air baffle.
To replace the component, reverse the removal procedure.
Heatsink
To remove the component:
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
1.
Power down the node (on page 21 ).
2.
Remove the node from the chassis (" Remove a node from the chassis " on page 22 ).
3.
Remove the access panel (on page 23 ).
4.
Remove the processor air baffle (" Processor air baffle " on page 28 ).