background image

 

Customer self repair  5 

Customer self repair 

HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow for 

greater flexibility in performing defective parts replacement. If during the diagnosis period HP (or HP service 

providers or service partners) identifies that the repair can be accomplished by the use of a CSR part, HP will 
ship that part directly to you for replacement. There are two categories of CSR parts: 

 

Mandatory

—Parts for which customer self repair is mandatory. If you request HP to replace these parts, 

you will be charged for the travel and labor costs of this service. 

 

Optional

—Parts for which customer self repair is optional. These parts are also designed for customer 

self repair. If, however, you require that HP replace them for you, there may or may not be additional 

charges, depending on the type of warranty service designated for your product. 

NOTE: 

 Some HP parts are not designed for customer self repair. In order to satisfy the customer warranty, 

HP requires that an authorized service provider replace the part. These parts are identified as "No" in the 
Illustrated Parts Catalog. 
Based on availability and where geography permits, CSR parts will be shipped for next business day 

delivery. Same day or four-hour delivery may be offered at an additional charge where geography permits. 

If assistance is required, you can call the HP Technical Support Center and a technician will help you over the 
telephone. HP specifies in the materials shipped with a replacement CSR part whether a defective part must 

be returned to HP. In cases where it is required to return the defective part to HP, you must ship the defective 

part back to HP within a defined period of time, normally five (5) business days. The defective part must be 

returned with the associated documentation in the provided shipping material. Failure to return the defective 
part may result in HP billing you for the replacement. With a customer self repair, HP will pay all shipping 

and part return costs and determine the courier/carrier to be used. 
For more information about HP's Customer Self Repair program, contact your local service provider. For the 

North American program, refer to the HP website Parts only warranty service 

Your HP Limited Warranty may include a parts only warranty service. Under the terms of parts only warranty 

service, HP will provide replacement parts free of charge.   
For parts only warranty service, CSR part replacement is mandatory. If you request HP to replace these parts, 
you will be charged for the travel and labor costs of this service. 

Réparation par le client (CSR) 

Les produits HP comportent de nombreuses pièces CSR (Customer Self Repair = réparation par le client) afin 

de minimiser les délais de réparation et faciliter le remplacement des pièces défectueuses. Si pendant la 

période de diagnostic, HP (ou ses partenaires ou mainteneurs agréés) détermine que la réparation peut être 
effectuée à l'aide d'une pièce CSR, HP vous l'envoie directement. Il existe deux catégories de pièces CSR: 

Содержание ProLiant SL4545 G7






























































Отзывы: