HP ProLiant SL4545 G7 Скачать руководство пользователя страница 24

Страница: 24 / 61

Removal and replacement procedures 24

•

Always be properly grounded when touching a static-sensitive component or assembly.

Symbols on equipment

The following symbols may be placed on equipment to indicate the presence of potentially hazardous

conditions.

This symbol indicates the presence of hazardous energy circuits or electric shock

hazards. Refer all servicing to qualified personnel.

WARNING:

To reduce the risk of injury from electric shock hazards, do not open this

enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.

This symbol indicates the presence of electric shock hazards. The area contains no user
or field serviceable parts. Do not open for any reason.

WARNING:

To reduce the risk of injury from electric shock hazards, do not open this

enclosure.

This symbol on an RJ-45 receptacle indicates a network interface connection.

WARNING:

To reduce the risk of electric shock, fire, or damage to the equipment, do

not plug telephone or telecommunications connectors into this receptacle.

This symbol indicates the presence of a hot surface or hot component. If this surface is

contacted, the potential for injury exists.

WARNING:

To reduce the risk of injury from a hot component, allow the surface to cool

before touching.

7.71 kg

17.00 lb

This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.

WARNING:

To reduce the risk of personal injury or damage to the equipment, observe

local occupational health and safety requirements and guidelines for manual material
handling.

These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.

WARNING:

To reduce the risk of injury from electric shock, remove all power cords to

completely disconnect power from the system.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING:

To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

•

Unplug the power cord from the power supply to disconnect power to the equipment.

•

Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

Содержание ProLiant SL4545 G7






























































Результаты поиска

Содержание ProLiant SL4545 G7

Отзывы:

Похожие инструкции для ProLiant SL4545 G7

Бренды по названию

Популярные бренды

HP ProLiant SL4545 G7, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant SL4545 G7

Отзывы:

Похожие инструкции для ProLiant SL4545 G7

Бренды по названию

Популярные бренды