HP ProLiant ML310e Gen Скачать руководство пользователя страница 75

Страница: 75 / 92

Component identification 75

FBWC module LED definitions

The FBWC module has three single-color LEDs (one amber and two green). The LEDs are duplicated on the
reverse side of the cache module to facilitate status viewing.

1 - Amber

2 - Green

3 - Green

Interpretation

Off

The cache module is not powered.

Off

Flashing 0.5 Hz Flashing 0.5 Hz The cache microcontroller is executing from within its

boot loader and receiving new flash code from the host
controller.

Off

Flashing 1 Hz

The cache module is powering up, and the capacitor

pack is charging.

Off

Flashing 1 Hz

The cache module is idle, and the capacitor pack is
charging.

Off

The cache module is idle, and the capacitor pack is
charged.

Off

The cache module is idle, the capacitor pack is charged,
and the cache contains data that has not yet been
written to the drives.

Off

Flashing 1 Hz

Off

A backup is in progress.

Off

The current backup is complete with no errors.

Flashing 1 Hz

Off

The current backup failed, and data has been lost.

Flashing 1 Hz

A power error occurred during the previous or current
boot. Data may be corrupt.

Flashing 1 Hz

Off

An overtemperature condition exists.

Flashing 2 Hz

Off

The capacitor pack is not attached.

Flashing 2 Hz

The capacitor has been charging for 10 minutes, but
has not reached sufficient charge to perform a full
backup.

Off

The current backup is complete, but power fluctuations
occurred during the backup.

The cache module microcontroller has failed.

Содержание ProLiant ML310e Gen





























































































Результаты поиска

Содержание ProLiant ML310e Gen

Отзывы:

Похожие инструкции для ProLiant ML310e Gen

Бренды по названию

Популярные бренды

HP ProLiant ML310e Gen, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant ML310e Gen

Отзывы:

Похожие инструкции для ProLiant ML310e Gen

Бренды по названию

Популярные бренды