Removal and replacement procedures 55
c.
Remove the heatsink from the processor backplate.
CAUTION:
To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
9.
Open the processor locking lever, and then open the processor retaining bracket.
10.
Grasp the processor by the edges, and then lift it out of the socket.
11.
Remove all DIMMs ("
Removing a DIMM
" on page
38
).
12.
Remove all expansion boards ("
Expansion board
" on page
44
).
13.
If installed, remove the dedicated iLO module ("
Dedicated iLO management port
" on page
50
).
14.
Disconnect all cables connected to the system board.
15.
Remove the system board:
a.
Remove the system board screws.
Содержание ProLiant ML310e Gen
