HP ProLiant ML100 Series, Руководство пользователя

Страница: 11 / 103

Furthermore, you must b
wiring and receptacles,
e sure that all power distribution devices used in the installation, such as branch
are listed or certified grounding-type devices.
Be o
power source, HP rec nently wired to the building’s branch
circuit or i industrial-style plug. NEMA locking-style plugs
or those com purpose. Using common power outlet
strips for t
Rack war
cause f the high ground-leakage currents associated with multiple servers connected to the same
ommends the use of a PDU that is either perma
ncludes a nondetachable cord that is wired to an
plying with IEC 60309 are considered suitable for this
he server is not recommended.
nings
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
full weight of the rack rests on the leveling jacks.
•
s.
ason.
•
The leveling jacks are extended to the floor.
•
The
• The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple-rack installation
•
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any re
WARNING: To reduce the risk of persona
rack:
•
At least two people are needed to safe
l injury or equipment damage when unloading a
ly unload the rack from the pallet. An empty 42U
•
Never stand in front of the rack when it is rolling down the ramp from the pallet. Always
handle the rack from both sides.
rack can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and
may become unstable when being moved on its casters.
Insta
option documentation. For server-specific information, refer to "Hardware options installation (on page
Pow
Insta
ve a supported operating system. For the latest information on
e HP website ( http://www.hp.com/go/supportos
lling hardware options
Install any hardware options before initializing the server. For options installation information, refer to the
13 )."
ering up and configuring the server
To power up the server, press the Power On/Standby button.
For detailed information on configuring the server, see the server installation sheet.
lling the operating system
To operate properly, the server must ha
supported operating systems, refer to th ).
ROM drive and
Easy Set-up CD or
To install an operating system on the server, insert the operating system CD into the CD-
reboot the server. This process may require you to obtain additional drivers from the
Setup 11