HP ProLiant EC200a, Руководство пользователя

Страница: 16 / 73

Operations 16
Prepare the server for hardware installation or
removal
1.
Verify that the server data has been recently backed up.
2.
Do one of the following:
o
Power down a single-server system (on page 15 ).
o
Power down a clustered system (on page 15 ).
3.
Disconnect the power cord from the AC source, and then disconnect the power adapter from the
server.
4.
Disconnect all peripheral cables from the server.
5.
If installed, unlock and remove the Kensington security lock.
For more information, see the Kensington security lock documentation.
Prepare the server for operation
1.
If removed, install the Kensington security lock.
For more information, see the Kensington security lock documentation.
2.
Connect all peripheral cables to the server.
3.
Connect the power adapter to the server, and then connect the power cord to the AC source.
4.
Secure the power cord and rear panel cables based on the standard cable management practices.
5.
Do one of the following:
o
Power up a single-server system (on page 14 ).
o
Power up a clustered system (on page 14 ).
Remove the server from the mounting/docking
hardware
If the server is installed in a cradle, wall mount, or storage expansion unit:
•
Remove the server from the cradle (on page 16 ).
•
Remove the server from the wall mount (on page 17 ).
•
Remove the server from the storage expansion unit (on page 17 ).
Remove the server from the cradle
1.
Open the latches on the cradle.