HP ProLiant EC200a Скачать руководство пользователя страница 14

Страница: 14 / 73

Operations 14

Operations

Server warnings and cautions

WARNING:

To reduce the risk of personal injury, electric shock, or damage to the equipment,

remove the power cord to remove power from the server. Pressing the Power On/Standby

button does not shut off system power completely. Portions of the power supply and some

internal circuitry remain active until AC power is removed.

WARNING:

To reduce the risk of electric shock, fire, or damage to the equipment, only

display devices that are qualified to be made of fire-retardant material must be connected to

the video connector (VGA) on the rear panel.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

To prevent improper cooling and thermal damage, do not operate the server with

the access panel and the M.2 SSD compartment cover open or removed.

CAUTION:

To prevent improper cooling and thermal damage, do not operate the server or

the storage expansion unit unless all device bays are populated with either a component or a

blank.

CAUTION:

To prevent damage to electrical components, take the appropriate anti-static

precautions before beginning any installation, removal, or replacement procedure. Improper

grounding can cause electrostatic discharge.

Hardware operations reminder

The following hardware operations must be carried out according to service installation, upgrade, and

maintenance instructions available in the server user documents (

http://www.hpe.com/info/EC-docs

) or

from HPE ProLiant Easy Connect Support (

https://support.prolianteasyconnect.com

Power up procedure

Power up a single-server system

Press the Power On/Standby button.
The server exits standby mode and full power is applied to the system.

Verify that the system power LED on the server is white ("

Front panel LEDs and button

" on page

Power up a clustered system

Press the Power On/Standby button on both servers within 5 minutes of each other.
The servers exit standby mode and full power is applied to the systems.

Содержание ProLiant EC200a










































































Результаты поиска

Содержание ProLiant EC200a

Отзывы:

Похожие инструкции для ProLiant EC200a

Бренды по названию

Популярные бренды

HP ProLiant EC200a, Руководство пользователя

Результаты поиска

Содержание ProLiant EC200a

Отзывы:

Похожие инструкции для ProLiant EC200a

Бренды по названию

Популярные бренды