HP ProLiant DL385p, Руководство по техническому обслуживанию и ремонту

Страница: 63 / 102

Removal and replacement procedures 63
7.
Remove the battery.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
System board
To remove the component:
1.
Power down the server (on page 25 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Remove the server from the rack (on page 27 ).
4.
Remove all power supplies (" AC power supply " on page 37 ).
5.
Remove the access panel (" Access panel " on page 30 ).
6.
Remove the air baffle (on page 31 ).
7.
Remove the PCIe riser cage (" Remove the secondary PCIe riser cage " on page 34 , " Remove the
primary PCIe riser cage " on page 33 ).
8.
If installed, remove the secondary PCIe riser cage (on page 34 ).
9.
If installed, remove the FBWC capacitor pack (" Flash-backed write cache capacitor pack " on page
48 ).
10.
If installed, remove the cache module (" Flash-backed write cache module " on page 47 ).
11.
Remove the FlexibleLOM (" FlexibleLOM " on page 42 ).
12.
Remove all DIMMs (" DIMMs " on page 61 ).
13.
Remove the fan cage (" Fan cage " on page 41 ).
14.
Remove the power supply backplane (" Power supply backplane " on page 39 ).
15.
Disconnect all cables connected to the system board.
16.
Remove the heatsink.
17.
Remove the processor (" Processor " on page 56 ).